• Mar-plij, eilit/pegit ar gemennadenn fazi a zo war ho skramm, ma zo unan.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Displegit deomp, mar-plij, ar pezh ho poa c'hoant d'ober, ar pezh ho peus graet hag ar pezh a zo c'hoarvezet 'benn ar fin

I tried reloading the game, but interface options were unchanged.

• Peseurt merdeer eo hoc'h hini ?

• Mar-plij, eilit/pegit an destenn e Saozneg ha n'eo ket en ho yezh. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Ha dibres eo an destenn-mañ er sistem treiñ? Ma ya, daoust ha troet eo bet ouzhpenn 24 eur 'zo ?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?

• Displegit ho kinnig mar-plij, e berrgomzoù met en un doare resis, evit ma vefe an aesañ posupl kompren mat ar pezh ho peus c'hoant lâret.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?

• Petra oa diskouezet war ar skramm pa 'z oc'h chomet stanket (Skramm goullo ? Ul lodenn eus etrefas ar c'hoari ? Kemennadenn fazi ?)

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?

• Pesseurt reolenn n'eo ket doujet gant azasadenn ar c'hoari-mañ ?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Ha posupl eo gwelet torridigezh ar reolenn e replay ar bartienn ? Ma 'z eo ya, da be niverenn taol ?

I tried reloading the game, but interface options were unchanged.

• Peseurt merdeer eo hoc'h hini ?

• Peseurt taol ho peus c'hoant c'hoari ?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Petra emaoc'h o klask ober evit delankañ an ober c'hoari-mañ ?

I tried reloading the game, but interface options were unchanged.

• What happened when you try to do this (error message, game status bar message, ...)?

n/a

• Peseurt merdeer eo hoc'h hini ?

• Da be bazenn ar bartienn eo en em gavet ar gudenn (petra oa testenn kemenn ar c'hoari) ?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• What happened when you try to do a game action (error message, game status bar message, ...)?

I tried reloading the game, but interface options were unchanged.

• Peseurt merdeer eo hoc'h hini ?

• Mar-plij, diskrivit kudenn an diskwel. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?

• Mar-plij, eilit/pegit an destenn e Saozneg ha n'eo ket en ho yezh. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Ha dibres eo an destenn-mañ er sistem treiñ? Ma ya, daoust ha troet eo bet ouzhpenn 24 eur 'zo ?

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?

• Displegit ho kinnig mar-plij, e berrgomzoù met en un doare resis, evit ma vefe an aesañ posupl kompren mat ar pezh ho peus c'hoant lâret.

I wanted to set an enemy in the "middle" position of the 3 right-hand-side spaces on fire, using the Immolated's second skill.
In Combat Round 1, I did exactly that. One fire token was placed.
In Combat Round 2, I had a second opportunity to use a skill and so wanted to "finish off" the enemy with the second fire token. But the interface only allowed me two choices;
1. Set the other, closer, enemy on Fire.
2. Use my Rusty Sword item - an item only usable in round 2.

Note also that the enemy I wished to target also didn't have the thick yellow selection border around its card so I couldn't select it via the card graphic either.

• Peseurt merdeer eo hoc'h hini ?